This Gesshin Heiji 240mm Wa-Gyuto is made from Iwasaki's special Swedish carbon steel. It is hardened to about 63hrc. It comes with an octagonal burnt chestnut handle, however does not come with a saya, unlike the picture.
Knife Type: Gyuto
Steel Type: Carbon
Handle Type: Octagonal Burnt Chestnut
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 139mm
Handle Height: 28.31mm
Handle Width: 23.38mm
Handle to Tip Length: 262mm
Heel to Tip Length: 249mm
Width of Spine at Middle: 2.35mm
Width of Spine 1cm from the Tip: 1.44mm
Width of Spine at Handle: 4.01mm
Width of Spine above Heel: 3.35mm
Blade Thickness 1/2 way between the Spine and Edge: 2.27mm
This Gesshin Heiji 270mm Wa-Gyuto is made from Heiji's special Semi-Stainless steel. It is hardened to about 63hrc. It comes with a burnt chestnut octagonal handle and ho wood saya.
Knife Type: Gyuto
Steel Type: Semi-Stainless
Handle Type: Burnt Chestnut Octagon
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 148mm
Handle Height: 28.49mm
Handle Width: 23.93mm
Handle to Tip Length: 290mm
Heel to Tip Length: 276mm
Width of Spine at Middle: 2.17mm
Width of Spine 1cm from the Tip: 1.68mm
Width of Spine at Handle: 4.29mm
Width of Spine above Heel: 4mm
Blade Thickness 1/2 way between the Spine and Edge: 2.72mm
This Gesshin Heiji 270mm Wa-Gyuto is made from Heiji's special Semi-Stainless steel. It is hardened to about 63hrc. It comes with a burnt chestnut octagonal handle.
This product does not include a saya, unlike the product photos listed below, and will be updated soon to reflect the available inventory.
Knife Type: Gyuto
Steel Type: Semi-Stainless
Handle Type: Burnt Chestnut Octagon
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 149mm
Handle Height: 28.44mm
Handle Width: 24.17mm
Handle to Tip Length: 293.5mm
Heel to Tip Length: 276mm
Width of Spine at Handle: 5.2mm
Width of Spine above Heel: 4.09mm
Width of Spine at Middle: 2.13mm
Width of Spine 1cm from the Tip: 1.28mm
Blade Thickness 1/2 way between the Spine and Edge: 2.03mm
This Gesshin Heiji 270mm Wa-Sujihiki is made from Heiji's special Semi-Stainless steel. It is hardened to about 63hrc. It comes with a burnt chestnut octagonal handle. A saya is not included with this knife.
Knife Type: Sujihiki
Steel Type: Semi-Stainless
Handle Type: Burnt Chestnut Octagon
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 145mm
Handle Height: 25.06mm
Handle Width: 21.20mm
Handle to Tip Length: 291mm
Heel to Tip Length: 278mm
Width of Spine at Middle: 2.53mm
Width of Spine 1cm from the Tip: 1.20mm
Width of Spine at Handle: 4.09mm
Width of Spine above Heel: 3.64mm
Blade Thickness 1/2 way between the Spine and Edge: 3mm