The Shiun line is a series made in the Seki City by Seki Kanetsugu. They feature a VG10 core at about 60hrc, with stainless tsuchimne (hammered) cladding. These are relatively easy to sharpen and are pretty thin, but aren't quite as brittle as some of the harder knives we carry. The Shiun series has a wide bevel design, which helps with food release. The upper section has a hammered finish with a smoke-like color to the finish. The handles are octagonal oak. These are great knives for people looking for thin stainless knives with good food release. They will have better edge retention than softer steels like AUS8, but wont be as brittle as harder steels like sg2, blue #1, or white #1.
Knife Type: Santoku
Steel Type: VG10 Stainless
Handle Type: Octagonal Oak
Construction Type: Stainless Tsuchime Clad
Hand Orientation: Ambidextrous
Handle Length: 133mm
Handle Height: 26mm
Handle Width: 21mm
Handle to Tip Length: 185mm
Heel to Tip Length: 171mm
Width of Spine at Middle: 2.01mm
Width of Spine 1cm from the Tip: 0.94mm
Width of Spine at Handle: 2.07mm
Width of Spine above Heel: 2.08mm
Blade Thickness 1/2 way between the Spine and Edge: 2.01mm
The Shiun line is a series made in the Seki City by Seki Kanetsugu. They feature a VG10 core at about 60hrc, with stainless tsuchimne (hammered) cladding. These are relatively easy to sharpen and are pretty thin, but aren't quite as brittle as some of the harder knives we carry. The Shiun series has a wide bevel design, which helps with food release. The upper section has a hammered finish with a smoke-like color to the finish. The handles are octagonal oak. These are great knives for people looking for thin stainless knives with good food release. They will have better edge retention than softer steels like AUS8, but wont be as brittle as harder steels like sg2, blue #1, or white #1.
Knife Type: Nakiri
Steel Type: VG10 Stainless
Handle Type: Octagonal Oak
Construction Type: Stainless Tsuchime Clad
Hand Orientation: Ambidextrous
Handle Length: 133mm
Handle Height: 26mm
Handle Width: 21mm
Handle to Tip Length: 183mm
Heel to Tip Length: 165mm
Width of Spine at Middle: 1.97mm
Width of Spine 1cm from the Tip: 1.97mm
Width of Spine at Handle: 1.98mm
Width of Spine above Heel: 2.06mm
Blade Thickness 1/2 way between the Spine and Edge: 1.94mm