This Gesshin Heiji 150mm Ikasaki is made from Iwasaki's special Swedish carbon steel. It is hardened to about 63hrc. It comes with an octagonal burnt chestnut handle and sandalwood saya.
Knife Type: Ikasaki
Steel Type: Carbon
Handle Type: Octagonal Burnt Chestnut
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 121mm
Handle Height: 23.78mm
Handle Width: 20.07mm
Handle to Tip Length: 168mm
Heel to Tip Length: 159mm
Width of Spine at Handle: 3.71mm
Width of Spine above Heel: 3.27mm
Width of Spine at Middle: 3.18mm
Width of Spine 1cm from the Tip: 1.31mm
Blade Thickness 1/2 way between the Spine and Edge: 2.85mm
This Gesshin Heiji 165mm Kurouchi Santoku is made from Iwasaki's special Swedish carbon steel. It is hardened to about 63hrc. It comes with an octagonal Ho Wood handle.
Knife Type: Santoku
Steel Type: Carbon
Handle Type: Octagonal Ho Wood
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 128mm
Handle Height: 25.89mm
Handle Width: 20.84mm
Handle to Tip Length: 185mm
Heel to Tip Length: 167mm
Width of Spine at Middle: 2.23mm
Width of Spine 1cm from the Tip: 1.52mm
Width of Spine at Handle: 4.17mm
Width of Spine above Heel: 3.43mm
Blade Thickness 1/2 way between the Spine and Edge: 26.2mm
This Gesshin Heiji 210mm Wa-Gyuto is made from Iwasaki's special Swedish carbon steel. It is hardened to about 63hrc. It comes with an octagonal burnt chestnut handle.
* This unit does not come with a saya - product photos will be updated in the near future.
Knife Type: Gyuto
Steel Type: Carbon
Handle Type: Octagonal Burnt Chestnut
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 122mm
Handle Height: 26.96mm
Handle Width: 22.62mm
Handle to Tip Length: 235mm
Heel to Tip Length: 221mm
Width of Spine at Handle: 4.49mm
Width of Spine above Heel: 3.68mm
Width of Spine at Middle: 2.38mm
Width of Spine 1cm from the Tip: 0.85mm
Blade Thickness 1/2 way between the Spine and Edge: 2.35mm
This Gesshin Heiji 240mm Wa-Gyuto is made from Iwasaki's special Swedish carbon steel. It is hardened to about 63hrc. It comes with an octagonal burnt chestnut handle, however does not come with a saya, unlike the picture.
Knife Type: Gyuto
Steel Type: Carbon
Handle Type: Octagonal Burnt Chestnut
Construction Type: Clad
Hand Orientation: Ambidextrous
Handle Length: 139mm
Handle Height: 28.31mm
Handle Width: 23.38mm
Handle to Tip Length: 262mm
Heel to Tip Length: 249mm
Width of Spine at Middle: 2.35mm
Width of Spine 1cm from the Tip: 1.44mm
Width of Spine at Handle: 4.01mm
Width of Spine above Heel: 3.35mm
Blade Thickness 1/2 way between the Spine and Edge: 2.27mm